Home page (8)

Our Pro-boat Speed Decks are made for fast and light paddling, whether that's racing, winter training, or paddling in any situation where you want to deflect water or keep the sun and paddle drips off your legs. Specifically designed for narrow-gunwale USCA 3x27 "Pro-boat" racing canoes, they're designed with racers in mind: HyperD 300 diamond-grid ripstop polyester fabric is durable, waterproof, and lightweight. Velcro attachment is low-profile, doesn't require drilling holes or making modifications to your boat, and avoids snaps that could damage other boats when rubbing rails in tight packs. Arched battens in the bow and stern lap decks shed water and prevent pooling. Knee pockets are cut to allow free leg movement, but sculpted to avoid water pooling. A 4-piece lap transition offers a comfortable, tapered fit to shed water and minimize excess fabric. The stretch waistband adjusts to provide about 4-inches of comfortable, forward movement without drawcords or zippers. Webbing grab-loops at each corner make removing the deck to exit the boat or access gear a quick, one-handed task. Each Speed Deck is custom-made to ensure a perfect fit for your boat and normal seat position. To custom fit your deck, simply measure these distances: The distance from the front edge of the opening that the Speed Deck should cover to the front edge of the seat in its normal paddling position. Do not add any distance for the width of the Velcro at the front edge. If you want a bow cover to go all the way to the front of the boat, measure from the tip of the bow to the front edge of the bow seat.  The width between the outer edges of the gunwales at the front edge of the Speed Deck. The width between the outer edges of the gunwales at the front edge of your seat in its normal paddling position.  To keep our deck prices as low as possible, we do NOT usually ship them with the adhesive-backed loop Velcro that is placed on the boat. If you need the adhesive loop Velcro for your boat, be sure to select it when you place your order.

IF YOUR CANOE PATTERN IS NOT LISTED IN THE DROP-DOWN OPTIONS, DON'T WORRY!  While we have many patterns for many canoes, there are always many more that we don't have. Contact us at hello@redleafdesigns.com or (906) 451-4539 and we'll send you a measurement guide so that we can make a custom-fit cover for your boat. Before ordering a WeatherMax 3D cover, please read this statement about minor cosmetic flaws in WeatherMax 3D fabric. The link will open in a new window, so you will not lose any information you've already selected on this product page.  _________________________________   Original Bag Lady canoe covers have been the standard for over 42 years and have protected the life and appearance of thousands of canoes in that time. Bag Lady covers protect the hull of your canoe from UV damage, fading, bugs, scratches, stone chips, and more when you're transporting or storing your canoe. Previous owners attest to the benefits of protecting their canoes with the one and only Bag Lady canoe covers, reporting: Less darkening and aging of Kevlar Less blushing, milking, and yellowing of epoxy Less oxidation and fading of fiberglass gelcoat Less fading of Royalex Less wear on wood canvas and cedar strip boats Less required maintenance Higher resale values Bag Lady canoe covers are unequaled in durability and workmanship, offering a unique closure system, an impeccable fit, and top quality, Made-In-The-USA fabrics to protect your canoe. They are all made in our family sewing loft in Skandia, Michigan. Original Bag Lady canoe covers are ONLY available directly from RedLeaf Designs. Beware of imitations and look for the RedLeaf Designs logo on your canoe cover! Bow-first or Stern-first? Bow-first covers are our most popular option, but if you carry your boat backward (stern-first) on your car, we recommend getting a stern-first cover. A stern-first cover is sewn in reverse, enclosing stern of the boat rather than the bow so that it faces into the wind properly while driving.  Carrying Thwart Location We have the factory spec location for the front carrying handle / thwart on all of our cover patterns. Unfortunately, because of the way the gunwales taper at the bow, a carrying thwart that's 1/2" wider or narrower than the factory specification can move many inches forward or backward, especially in long, narrow racing canoes and solo boats. Thwarts may also be in non-spec locations due to after market outfitting, restorations, custom orders, or specifications that changed at the factory over time.To ensure that the slit for your carrying thwart or handle is in exactly the right place on your cover, we encourage you to measure from the tip of the bow to the center of the carrying handle and include that information in your order.  We can also use the factory specified location that we have on file, though we can't guarantee that it will be perfect for your boat.  Why Polyester? Our most popular and budget-minded fabric is a durable, stretch polyester double-knit. It's long-wearing and great for general protection from UV damage, road dirt, bugs, strap-rub, etc. This is the fabric that you probably have in mind when you think of a Bag Lady canoe cover. ​Note that polyester is not waterproof or water-resistant. This isn't a problem for most Royalex, fiberglass, carbon, or Kevlar boats since the fabric breathes very well and dries quickly: water won't damage most canoes.  ​However, you may want to consider WeatherMAX 3D fabric if you have a wood-canvas canoe, oiled wood gunwales or trim, or store your boat outdoors in places with lots of sun or harsh winters. Polyester also fades quickly in the sun, but we still think it's a great material for a cover. We use a premium polyester fabric that's thick and will give you many, many years of service even though the outside of the fabric will fade.  Why WeatherMax 3D? WeatherMax 3D is a premium outdoor fabric that offers the same, form-fitting stretch and exceptional fit of polyester, with a number of additional benefits: Water-resistant and breathable Blocks 99% of UV light for long-term UV resistance Exceptionally color-fade resistant HydroMax finish for dirt and mildew resistance 100% pigment solution-dyed SaturaMax fibers It's the ultimate canoe cover fabric and will protect even the most sensitive wood and canvas and oiled wood trim canoes, while still offering the exceptional fit that comes with stretch material.  While our premium polyester has been the mainstay of the Bag Lady canoe covers for the past 40+ years, we think that WeatherMax 3D will change that very quickly. The additional cost of a WeatherMax 3D cover is well worth the investment if you want the best possible protection or your canoe is stored outdoors. Before ordering a WeatherMax 3D cover, please read this statement about minor cosmetic flaws in WeatherMax 3D fabric. The link will open in a new window, so you will not lose any information you've already selected on this product page.  Multi-color Polyester Covers Premium polyester fabric is available in a limited range of colors which can be combined in a multi-color cover. We offer two "standard" multi-color patterns. If you'd like a different pattern, we may be able to make unique patterns during the winter if our workload allows. The "Bow Stripe" pattern has three panels, each of which can be a different color. The "End Stripes" pattern also has three panels, each of which can be a different color.  Pricing The base price for a canoe cover is $249 in premium polyester or $349 in WeatherMax 3D. Covers may cost more for canoes longer than 18'6", with hull measurements larger than 54", with recurved sterns requiring a special closure, or with other special design requests, including stern-first construction and multi-color covers.  Delivery Time Bag Lady canoe covers are made-to-order. In the winter, we're often able to begin working on your cover within a day or two and ship it within a week. During the busy spring and summer paddling seasons, we're often running a month or so out on orders. Check the home page for our current lead time, as well as any in-stock covers that are immediately available.

Our padded, durable paddle cases are like Fort Knox for your canoe and kayak paddles. Made from a durable, breathable WeatherMax LT fabric exterior and padded with quilted polyester lining, these cases protect your paddles from more than the casual bumps and drops. Each case will hold two canoe paddles or one two-piece kayak paddle in compartments separated by a quilted and padded divider. If you don't mind your paddles sharing compartments, they'll hold four canoe paddles or two two-piece kayak paddles.  The cases have a convenient, balanced carrying handle, a secure Velcro closure, and hold paddles narrower than 12”. The case size indicates the longest paddle they will hold; if you have a 56" paddle, the 56" paddle case will comfortably protect it with a bit more than an inch to spare.Personally, we keep our primary and spare paddles for solo paddling in one of these cases and a second case with our tandem paddles in it.  Details: Shell:  WeatherMax LT Padding and lining: Quilted polyester  Trim:  Polyester binding Other: Velcro closure and webbing handle Note: If you want to keep your paddles safe from scratches and bumps in your car, but think that our padded paddle cases are more than you need, click here to learn about our lighter, premium polyester paddle socks.

IF YOUR KAYAK PATTERN IS NOT LISTED IN THE DROP-DOWN OPTIONS, DON'T WORRY!  While we have many patterns for many kayaks, there are always many more that we don't have. Contact us at hello@redleafdesigns.com or (906) 451-4539 and we'll send you a measurement guide so that we can make a custom-fit cover for your boat.  Before ordering a WeatherMax 3D cover, please read this statement about minor cosmetic flaws in WeatherMax 3D fabric. The link will open in a new window, so you will not lose any information you've already selected on this product page.  _________________________________ Our Bag Lady kayak covers are made from the same premium, double-knit polyester or marine-grade WeatherMax 3D fabric as our famous canoe covers. These covers protect the hull of your kayak from UV damage, fading, bugs, scratches, stone chips, road grime, and more when you're transporting or storing your kayak.  The cover fully encloses the kayak and seals with a durable, plastic #10 YKK marine zipper. Understern and overstern rudders are accommodated with a variety of closure variations depending on your boat's specific rudder system and positioning.  Each cover is custom-sewn for your kayak to ensure a perfect fit that minimizes flapping when traveling and provides easy access to carry toggles, handles, and tie-down points.  Previous owners of Bag Lady kayak covers attest to the benefits of protecting their kayaks with the one and only Bag Lady kayak covers, reporting: Less darkening and aging of Kevlar Less blushing, milking, and yellowing of epoxy Less oxidation and fading of fiberglass gelcoat Less fading of polyethylene Less travel wear and road dirt Less required maintenance Less UV damage to hatches, deck lines, cockpit covers, and deck fittings Higher resale values Bag Lady kayak covers are unequaled in durability and workmanship, offering a unique closure system, an impeccable fit, and top quality, Made-In-The-USA fabrics to protect your kayak. They are all made to order in our family sewing loft in Skandia, Michigan.  Bag Lady kayak covers are ONLY available direct from RedLeaf Designs. Beware of imitations and look for the RedLeaf Designs logo on your kayak cover! WHY POLYESTER? Our most popular and budget-minded fabric is a durable, stretch polyester double-knit. It's long-wearing and great for general protection from UV damage, road dirt, bugs, strap-rub, etc. This is the fabric that you probably have in mind when you think of a Bag Lady cover.  Note that polyester is not waterproof or water-resistant. This isn't a problem for most fiberglass, carbon, Kevlar, cedar strip, or polyethylene kayaks, since the fabric breathes very well and dries very quickly: water won't damage most kayaks. In fact, breathability is crucial so that the cover doesn't trap moisture between the cover and the boat, leading to mildew and mold issues.  Polyester also fades quickly in the sun, but we still think it's a great material for a cover. We use a premium polyester fabric that's thick and will give you many, many years of service even though the outside of the fabric will fade.  WHY WEATHERMAX 3D? WeatherMax 3D is a premium outdoor, marine-grade fabric that offers the same, form-fitting stretch and exceptional fit of polyester, with a number of additional benefits: Water-resistant and breathable Blocks 99% of UV light for long-term UV resistance Exceptionally color-fade resistant HydroMax finish for dirt and mildew resistance 100% pigment solution-dyed SaturaMax fibers While our premium polyester has been the mainstay of the Bag Lady covers for the past 40+ years, the additional cost of a WeatherMax 3D cover is well worth the investment if you want the best possible cover longevity or your canoe is stored outdoors. Before ordering a WeatherMax 3D cover, please read this statement about minor cosmetic flaws in WeatherMax 3D fabric. The link will open in a new window, so you will not lose any information you've already selected on this product page.  PRICING Most polyester kayak covers cost $259 for kayaks up to 18-1/2 feet long with a maximum hull circumference of 56 inches or less. WeatherMax 3D covers start at $359. Longer and wider kayaks and kayaks with understern or overstern rudders will require an upcharge for additional fabric and labor.  DELIVERY TIME Most covers are made-to-order. In the off-season, we're often able to begin working on your cover within a day or two and ship it within a week. During the busy Spring and Summer seasons, we often run a month or so out on orders.  Check the home page for our current lead time, as well as any in-stock covers that are available immediately. 

The Ultimate Cover is the best storage and transport protection available for your kayak, surf ski, or outrigger canoe. The Ultimate Cover is more robust and durable than our stretch-fit Original Bag Lady covers and has a full-length marine zipper closure that makes installation and removal easy and fast, even when you’re solo. It takes less than 60 seconds for one person to put an Ultimate Cover on a boat. Like all of our covers, the Ultimate Cover is custom sewn for your specific sea kayak, surf ski, or outrigger canoe to ensure a great fit. These covers fully enclose your boat and are designed for long-term indoor and outdoor storage, as well as transportation at highway speeds. Features that set the Ultimate Cover apart from the competition for durability, rugged construction, and convenience include: Sunbrella Marine fabric, the best marine-grade, water- and UV-resistant fabric available A full-length, YKK #10 molded marine zipper Fully bound edges Double- and triple-reinforced seams Reinforced bow tie-down points with welded stainless steel D-rings Optional reinforced, mesh-lined drains Optional reinforced carry handles Optional quilted polyester padding When ordering, be sure to tell us if your boat has any non-standard features or options, like an add-on over-stern rudder, wave deflectors, deck compasses, RAM or other high-profile mounts, etc. If you’re not sure, feel free to email or call us! Should I get a padded cover? We generally don't recommend getting a padded cover. If you have a very fragile boat or keep your boat in a club or public storage area, padding can offer a bit of extra protection from the unavoidable bumps and scuffs. However, padding is also another place for grit and sand to accumulate and can take longer to dry than an unpadded cover. We can tell you that we only have padding in one of our own Ultimate Covers - our most fragile, lightweight ICF K1 that is stored indoors. What is the difference between an Ultimate Cover and an Original Bag Lady cover? Our Ultimate Covers are custom-fit from non-stretch, marine-grade Sunbrella fabric and have a full-length zipper so the boat can go directly in and out of the cover. When they’re on the boat, there is about an inch of slack fabric around the circumference of the boat. Our Original Bag Lady covers are made from a stretch-fit premium polyester or marine-grade WeatherMax 3D. The front half of the cover slips over the bow like a sock and the back half zips up to enclose the boat. There is little to no slack fabric around the circumference of the boat. Both styles of cover fully enclose your kayak/surf ski/outrigger canoe and are made from breathable fabric. The Ultimate Cover is more durable, better for long-term outdoor storage, and easier to put on; the Original Bag Lady covers are more economical (in premium polyester), lighter, and offer a driving-glove-like fit. Should I get drains? We offer optional reinforced mesh drains sewn into the bottom of the Ultimate Cover. Depending on the length of the boat and whether it has an under-stern rudder, we install two or three drains on a cover.  The Sunbrella fabric is very water resistant, but not waterproof. Additionally, the #10 molded marine zipper is not waterproof. As a result, some water will get into the cover in heavy precipitation. If you store your boat upside down so the zipper is on the bottom, you don't need the drains - any water that manages to get through the fabric will exit through the zipper. This is how we recommend storing and transporting your boats, both to avoid the need for drains in the cover and to avoid water accumulating in the cockpit or bucket.  If you store or transport your boat right-side up and where precipitation falls on it, we recommend adding the drains so that any water that enters the cover through the zipper or fabric can easily exit. Residual moisture will evaporate through the breathable Sunbrella material without causing any harm to the boat or the cover. Should I order the optional carry handles? Some customers carry their boats by wrapping their arms around the bow and stern and don't want webbing handles added to the cover. Other customers prefer to carry the boat by a handle and appreciate having a webbing carry handle added to the cover.  If your boat already has a stern carry handle built in, you can always access it by unzipping the stern of the cover when you're carrying the boat. We don't think a stern carry handle is needed on those boats.  Personally, we add the bow carry handle to our heavier sea kayaks, but leave them off of our lighter surf skis and racing kayaks.  Which type of cover would we choose for our own kayaks, surf skis, and outrigger canoes? We’ve replaced all of our Original Bag Lady covers for our kayaks, surf skis, and outrigger canoes with Ultimate Covers. We created the Ultimate Cover because Jeremy was tired of wrestling the front 11 feet of his 21-foot surf skis into its Original Bag Lady kayak cover after long training paddles and wanted a full-zip, non-stretch option that was faster and easier to put on.  My kayak, surf ski, or outrigger canoe isn't listed in the Manufacturer or Model drop down. What do I do? Don't worry! We make all of our patterns from measurements and don't need your boat in the shop to make a perfect cover. Just contact us by email at hello@redleafdesigns.com or by phone at +1 (906) 451-4539 and we can send you a measurement packet that walks you through the measurements we need, step-by-step. Can I get an Ultimate Cover for my open canoe? We don’t offer full-zip Ultimate Covers for canoes due to the large circumference of most canoe designs. However, we do offer the Canoe Coat, a durable long-term outdoor storage cover made from the same custom-fit, marine-grade Sunbrella fabric and featuring quick on-and-off buckle straps. It’s the highest level of storage protection and the most durable, UV-resistant cover you can get for your canoe, but is not suitable for transportation on a vehicle. 

The Canoe Coat is the best outdoor storage protection you can get for your canoe. Made from durable, UV- and water-resistant Sunbrella fabric, the best marine-grade fabric available, the Canoe Coat is custom sewn to cover your canoe’s hull and secures with quick-release hooks and bungies. Installation and removal are quick and easy, taking about 60 seconds for one person.Sunbrella fabric carries a 10-year warranty against fading and UV damage and is the leading fabric in the marine industry. It blocks 100% of UV light, is very water resistant, and is breathable to allow moisture and heat to escape. It’s the best protection you can get for your canoe and is the same fabric we use for our Ultimate Covers for kayaks, surf skis, and outrigger canoes. If you store your boat outdoors, especially if it has wood gunwales or is a beloved wood and canvas boat, or you want the best protection and long-term value in a canoe cover, the Canoe Coat is what we recommend. Canoes that are stored outdoors get most of their UV exposure and damage when in storage. These covers are definitely the most effective and long-lasting way to protect them. Note that the Canoe Coat is NOT a travel cover. If you would like a canoe cover that’s safe for transport up to highway speeds, please see our Original Bag Lady Canoe Covers. Should I get the optional padding? A padded Canoe Coat offers an extra level of protection against bumps and scrapes when your canoe is on the storage rack, especially if your canoe is stored in a club or other public location with other boats. Note that the padding can collect dirt, grit, and moisture, so it does require some extra care. We don’t recommend the padding if your boat is stored outdoors for the winter in a place with prolonged temperatures below freezing and you use your boat during the colder seasons - the padding can freeze to the boat hull and tear if you try to remove it when it's still frozen. My canoe isn't listed in the Manufacturer or Model drop down. What do I do? Don't worry! We make all of our patterns from measurements and don't need your boat in the shop to make a perfect cover. Just contact us by email at hello@redleafdesigns.com or by phone at +1 (906) 451-4539 and we can send you a measurement packet that walks you through the measurements we need, step-by-step. Can I get a Canoe Coat for my kayak, surf ski, or outrigger canoe? We don’t offer Canoe Coats for kayaks, surf skis, or outrigger canoes, but do make the Ultimate Cover for those boats. The Ultimate Cover is a durable long-term outdoor storage and transportation cover made from the same custom-fit, marine-grade Sunbrella fabric and featuring full coverage and a full-length marine #10 zipper. The Ultimate Cover is the highest level of storage and transport protection you can get for your kayak, surf ski, or outrigger canoe.

BUY 2 OR MORE STERN FLAGS AND GET A BUNDLED PRICE OF $10 PER FLAG.  Our stern flags are made from 1-1/2 inch webbing with bound and reinforced ends and a 3/4" webbing attachment loop for durability. They can be attached to a rudder, stern handle, carrying thwart, pad-eye, or anything else that the attachment loop will slip through.  Length of red webbing: 30 inchesLength of attachment loop: 10 inchesTotal length: 40 inches